This product is suitable for the rated voltage of 500 and below for the requirements of high anti-interference electronic computer and automatic connection cable. The cable core insulation adopts k xing b low density polyethylene with oxidation resistance. Polyethylene has high insulation resistance, good voltage resistance, small dielectric coefficient and dielectric loss temperature and frequency-varying, not only meet the requirements of transmission performance, but also ensure the service life of the cable.

In order to reduce the mutual crosstalk and external interference, the cable is shielded structure. The shielding requirements of cables are based on different occasions, such as the combination shielding, the total shielding of twisted-pair cables, the total shielding of the combined shielding and so on.

Shielding material has yuantongxian, copper strip, aluminum strip / plastic clad coil three kinds. The shielded pair has good insulation performance, and the cable in use, if shielded to the potential difference between the shielding pair, will not affect the transmission quality of the signal.

Installation of ambient temperature not less than: fixed laying - 40 ℃, Fei - 15 ℃

Minimum bending radius: the there is no shall not be less than 6 times of the outside diameter of the cable, and the cable shall not be less than 12 times of the outside diameter of the cable.

The insulation resistance shall not be less than 2500 m after the stable charging 1 min at 20 ℃ ± 500 v DC voltage test

There should be no way between the jiaopingbi and the jiaopingbi and zongpingbi.

The wire core and wire core of the cable shall withstand 50hz, AC 2000 v voltage test 5 min buji